Tag Archives: premo

Experiments With Pardo – Part II

As I hinted in my last post, I am back with more notes on my experiences with Pardo translucent clay. There are people doing some amazing things with this – check out Ginger Davis Allman’s website, The Blue Bottle Tree, for instance. She has done beautiful work with this clay and has posted her own very useful observances on the different brands of translucent clay. I am still in the process of experimenting with the Pardo translucent, so what better way to blog than to share my results?

As you can see, I was able to achieve much greater translucency in this second trial (see this post for the first run). Here’s another flower, in purple:

Purple trans flower

purple trans flower 2

It really amazes me that you can actually see the green stamen through the outside layer, and in the top photo you can see the ball of the head pin I was using to hold it with. Here’s a blue flower I did in that same batch:

blue flower 1

It was really fun and exciting to get these results. What did I do differently? First, I upped the temperature, to 275°F. I baked for 30 minutes, as before. When I pulled the pieces from the oven, they were still white. I plunged them into an ICE water bath, not just cold water as before, and waited awhile. This is the result.

I do have to say, I am not sure I like the pieces at this level of translucency. They are very clear, it’s true, but they are also very shiny. They really look like shiny plastic to me, rather than something made from art clay which happens to be plastic. I know, it’s a weird distinction. I just kind of like the first set of results better.

I like the cone shape, so I’m practicing making them. It is really hard to get the pieces thin enough using this method, but I’m working on it. I decided to work as well at getting results somewhere between my first set, which were more translucent, and the second set that is transparent but shiny. I just like the matte look better for these. Here are a few that I made last night. I haven’t gotten the translucency/transparency thing down right yet, but I still like my results:

Purple flower 1

013

Yellow Flowers

Green Flowers

That’s it for today… see you next time around.

Advertisements

Experiments With Pardo Translucent Clay

As you may have read in my last post, I recently bought some Pardo translucent clay from Lynda Gilcher at Lynda’s Artistic Haven. I have been intrigued by the photos I have come across on the web of work that people have done with the clay. People are getting some really amazing results with this clay, making objects that are quite nearly transparent. Here are my observations after working a couple of days with the clay.

When I got home from my shopping excursion, I sat down in my studio and opened the package of Pardo clay. The clay is very white and milky, unexpected when you are used to working with Premo! translucent. It seems pretty opaque when you work with it before it’s baked, and for a few minutes I thought maybe I had picked up white instead of translucent. I double checked the package and it did indeed say “translucent”.

pardo pre baking

The Premo package is in there to show perspective.

I started conditioning the clay by hand. I am impressed that the clay is easy to condition without crumbling, yet is not too soft to hold up to extensive working. I decided that I wanted to use the pinch pot method to make some cone-like forms that I could use to make flower earrings.

Now, the cones that I wanted to make are very small, which meant that I would not be able to rely on only my fingers to do the pinching. Instead, I used the very useful tool pictured above on the right. Shown are the beginnings of the cones that I made on the first try. I added some green to the clay on the left just for the effect. I continued to work them after I took the photo. I didn’t have anyone available to take photos for me, otherwise I would show the method I used to make the cones.

I found that the clay was pretty easy to work, but not particularly stretchy – if I worked too fast or wasn’t paying attention, I would tear the clay and have to start over. I made a cone from Premo! translucent too, just to be able to make comparisons. The Premo! was very easy to work with as well, and it was less susceptible to tearing, which is a plus in my book. I also mixed some pink clay into some Pardo at one point, mixing it completely instead of just  a little bit. I made the clay as thin as I possibly could, to maximize the translucent effect.

After making several pieces, it was off to the oven. You are supposed to bake this clay at 248°F, much lower than other clays I have worked with. I fudged and baked it at 250°, since my oven has a digital readout that only allows temperature gradations in 5° increments. I baked the objects for 30 minutes. When I pulled the items from the oven, they were white still – which upset me, but I plunged them into cold (but not icy cold – I was out of ice) water, and waited a few minutes. Here are the pieces from that baking:

Not transparent, but pretty translucent.

Not transparent, but pretty translucent.

A white cone. I didn’t stretch this one out as much as the others.

green cone 1

This is a the green cone. I stretched it out quite a bit after taking the first photo. Still, the cone is really quite small. It is translucent enough that you can see the pink stamen through the green/translucent.

pink flower

By contrast, this pink flower, in which I thoroughly mixed the pink clay, is pretty opaque. I should emphasize that the walls here are really thin – as thin as rice paper in some areas. They look thick in the photos due to the angle of the flowers and to the fact that I used “magnify” mode on the camera.

premo orange cone

This last photo is the Premo! clay. I made the mistake of mixing in orange, not thinking that it would make it hard to see the color of the translucent clay. Still, it is pretty obvious that the Premo! translucent is not only fairly opaque compared with the Pardo, but also somewhat yellow. I did use the “frost/white/bleached” translucent for this experiment.

I didn’t quite get the results I was hoping for, but don’t give up on this experiment yet, because the best is yet to come! In my next post, I’ll show you what happened in the next batch that I made. I think the results are fantastic. See you next time!

Field Trip!

I went shopping today… see what I got?

Lots of Pretty New Toys.

Lots of Pretty New Toys.

I was in need of some Premo! Frost translucent clay, as I had none, and I don’t care for the tint of the regular translucent that Premo! makes. I don’t like to have clay shipped in the summer because I’m afraid that it will get baked in the back of the delivery van. It was time that I paid Lynda Gilcher, of Lynda’s Artistic Haven, a call.

Lynda’s shop is located in the Loveland Artist Studios on Main, in Loveland, Ohio. Loveland is about an hour’s drive from my home in Dayton, Ohio. Lynda has been supplying the Dayton/Cincinnati area’s polymer clay needs for over 10 years. She is a very talented artist and she also sells her own handmade polymer art jewelry at her studio. Check out her work here. I really love what I call her pansies:

lynda's flowers

Pretty, right? She had them in all sorts of lovely colors at her studio. My thanks to Lynda for an afternoon well spent discussing clay. Please check out the links to her web page and photos.

Coming soon: Experiments with the Pardo translucent I bought today.

Don’t forget to check out my work on Etsy, and Like me on Facebook!

Tutorial: Pearlescent Rainbow Blend

13

The other day I was playing around with ideas for mokume gane, and I realized I hadn’t done a rainbow pearl blend in awhile. This is a useful way to make up a sheet of clay that can be used for several different techniques at a time, or just use it all at once for a technique that you really love. The advantage of using a blend in mokume gane is that, of course, you have that lovely shading. So here are the steps I followed in making my rainbow pearl blend.

1

The set-up.

I started out with 5 colors of Premo! clay – gold, peacock pearl, green pearl, navy blue, and purple pearl. I needed to make my navy clay pearlescent, so I added silver pearl. I find the newer Premo! pearlescent colors need a bit more pearliness for this kind of technique, so I added plain pearl to the peacock, green and purple pearl. I ran each color combination through the pasta machine 50 bazillion times, until the colors were completely mixed.

Next, I took each sheet, laid it out on my work surface, and squared up the edges – I actually had rectangles, which worked fine for my needs. Now here’s a trick: I needed to make right triangles in order to make my blend, and I didn’t want to waste any of the clay I had just mixed. After all, the idea is to have a nice large sheet of clay that I can use for several techniques. What I did was cut each sheet of clay on an angle, from a top corner across to a bottom corner (left to right or right to left, your choice). Then I laid these 2 triangles on top of each other so that I had a double layer of clay. You’ll see what I mean in the next section.

I set up each doubled triangle color section like this:

2

Feeling a bit out of balance.

If you look at the edges, you can see how I doubled the triangles of color. Now, I set up my triangles different from some other clayers. You have heard me say here before that I am not a stickler for accuracy. It is not my style to be perfect. I just like to get the job done. Other folks might have a diagram of how to cut and set out the clay in triangles that will give you a perfect blend. But doing it my way gave me a beautiful blend that I’m really happy with, as you can see with the first photo. At any rate, the photo above shows how I set up the triangles, but as you can see, there is something missing. I got everything set up and realized that I could probably use another color, plus it would balance out my sheet. So I mixed some alizaron crimson with some gold clay, followed the triangle making steps, and here’s my set-up:

3

Now isn’t that pretty.

Don’t worry about those little dots of peacock that are on the gold, because they are going to get mixed into the blend anyway.

Next step: It is very important to run your sheet through the pasta machine thusly:

6

Please ignore the junk in the background.

Think of your triangles as stripes, which is what they will become. You always want your stripes to run top to bottom, never side to side. It will really mess up your blend and make you cry if you do not heed this advice. Here’s the sheet after the first pass through the machine:

7

That red clay really spreads out.

It’s a bit wopple-joggled (never heard that one before?), but I’ll just trim it up and all will be well. Now, fold this sheet in half across the triangles, so that the colors match up (stripes run top to bottom, remember?).

8

Match colors to colors, please?

Here is the sheet folded:

9

Scary to make that fold, isn’t it?

At this point it’s so hard to know if you’re folding the sheet correctly, but here’s another hint: you always want your fold to be across all of the colors. If the red had touched the blue in this picture, I would be doing it wrong.

Now run the blend through the pasta machine again, fold first. Remove it from your machine, fold as before, roll it through the machine. Repeat approximately 15 times.  Here is my blend after 6 runs through the machine:

10

Getting there.

As you can see, the colors aren’t really mixed together yet, they’re just laying on top of each other. Here’s the sheet after 15 runs through the machine:

12

All blended up!

And there you have it. This sheet is about 5.5 inches wide by 12 inches long. I’ll be able to cut it into at least 3 sections and experiment with techniques. I’ll be sure to share when I do!